Combining the flexibility and heat resistance characteristics of silicone with added strength, Fenner Precision reinforced silicone sheet offers a uniquely high-performing, hardwearing and reliable product for demanding applications such as pipe rehabilitation and flexible heater systems.

As the leading specialists in designing and producing bespoke silicone solutions, Fenner Precision can successfully apply coating to almost every organic elastomer, including natural rubber, EPDM, and polychloroprene. We have the capability to specify and manufacture the ideal solutions for even the most challenging requirements.

Available cured or uncured, our material is specially designed to bond securely to any substrate, shape or texture. We also supply uncured, unreinforced materials for moulded sections, layering, and for patch repairs.

Our specially formulated silicone sheeting for ink-transfer flawlessly prints onto ceramic surfaces. Our ink-transfer sheeting is easily cleaned so it can be used time and time again.

Typical Physical Properties:

Various glass fibre fabrics are available (details can be provided upon enquiry)
The glass can be coated on one side only, or on both sides.
Silicone coated fabrics for this market are available with both faces uncured (DUC), one face cured and one face uncured (SUC) and also both faces cured (CC)
Silicone coating thickness can be as little as 0.1mm [0.004”]. There is no real limit on the maximum coating thickness, but we generally would not put more than 1.5mm [0.060”] of coating on at a time when calendering.
Most of our materials for this market are red as the material that gives them the red colour, red iron oxide, gives improved heat ageing characteristics
Coated fabric materials are usually supplied with a smooth polythene release material against each face, on cardboard cores. Un-reinforced sheeting is supplied with an embossed polythene release material against each face, on cardboard cores.

Value Adding Features:

✔ Silicones have good heat resistance properties ; standard silicone materials are UL (Underwriters Laboratory) approved for a continuous operating temperature (RTI) of 150ºC .

✔ Silicone is a good material in terms of burning characteristics ; whereas other elastomers emit a lot of harmful chemicals leaving a potent black sticky deposit when burnt, silicones perform much better in terms of emissions and leave a preferable white non-sticky residue.


Elastomer Coated Fabric Sheet Products
1 Customer data
2 Part description
3 Dimensional data
4 Application data
5 Custom requirements
6 Additional information
  • (*) denotes required field
  • This field is for validation purposes and should be left unchanged.

Request a sample pack

  • This field is for validation purposes and should be left unchanged.