Custom Belts
We are able to meet highly specific customer needs for flat belts with special profiles, material properties and …
Stretch Bands
Our unreinforced, anti-static Stretch Bands provide the ideal means for fast, accurate currency movement within cash dispensers and …
Custom Belts
We are able to meet highly specific customer needs for flat belts with special profiles, material properties and features. Our global technical team are on hand to provide advice and a development partnership, working alongside you to help you find the solution that fulfils all of your requirements.
Customised orders are developed by altering the material, dimensions, design, adding features and/or performing secondary operations. Some of the more frequent customisation requests are:
- Pitch alterations
- Features/Lugs (one side or both sides)
- Hole punching
- Dual Durometer
- Urethane type
- Reinforcement type
- Anti-static
- Surface finish
- Specific locations of teeth and/or features
- Long length, open-ended belts
- Teeth on both sides
- Belt width
- Surface grinding
- High friction silicone coating on backside
Related Case Studies
Stretch Bands
Our unreinforced, anti-static Stretch Bands provide the ideal means for fast, accurate currency movement within cash dispensers and for other applications.
We manufacture in a variety of unreinforced materials, including silicone, EPDM, chloroprene, hypalon, natural rubber and polyurethane – providing a superior alternative to competitor’s flat belts and complete flexibility for customers.
Product Benefits to you:
- Costs saving – efficient manufacture, minimal tooling, longer service life
- Superior tracking – Stretch Bands have replaced competitor’s reinforced flat belts to resolve tracking issues.
- Flexibility – Range of hardnesses to meet specific needs, tracking ribs or perforations if required.
- Reliability – Excellent tensile retention over a long working life and at a wide range of temperatures and humidity.
- Certified safe – anti-static and UL94HB approved at 1mm minimum thickness (the Fenner Precision standard)
- Versatility – operational between -20 and 50*C
Typical Market Sectors:
- Fixed center drives
- Copiers / office equipment
- Bill validation
- Money handling
- Media transfer
Related Case Studies
Typical Material and Physical Properties
- Belt sizes from 10mm to 300mm width and 75mm to 1500mm length
- General thickness tolerance of ± 0.15mm on press moulded belts and ± 0.1mm on ground/finished belt
- Installed load of nominally 1N/mm² of belt cross section
- Width tolerance normally ± 0.5mm
- Available with impression finish on one or both sides
- Different modulus materials available
- Available in a Dual Durometer construction
- Available with tracking ribs or perforations
- Sizes above 200mm long no tooling required
- Lower cost than competitors reinforced product (which requires tooling for all sizes)
- Improved tracking over reinforced product
- Better anti-static properties when measured against competitive reinforced product
Value Adding Features
- Lower cost system / no need for tensioning devices
- Antistatic construction options – avoid static build up / double feeds
- Long life – less maintenance / downtime
- Various material options – to fit your application needs
Supporting Documents
Vacuum Belts
Where speed of operation and detail are vital to customers, our advanced vacuum belts provide the ideal solutions. …
Lightweight Belts
Fenner Precision lightweight belts are typically manufactured from rubber, with a fabric reinforcement. Providing an excellent balance of …
Vacuum Belts
Where speed of operation and detail are vital to customers, our advanced vacuum belts provide the ideal solutions.
With the option of special profiles where required, for example on large inkjet printers, our vacuum belting ensures uninterrupted performance and rapid, highly accurate presentation of media or other material, time after time.
No matter what your requirements, we have a vacuum belt for you. If you need high temperature resistance, our silicone belts will do the trick. If high abrasion resistance and high tear strength are important, why not try our polyurethane belts.
We can produce no marking polyurethane vacuum belts with or without reinforcement depending on the need for a fixed belt length.
You can also choose from the following features:
- Polyurethane hardness
- We offer 65 shore A to 85 shore A
By using a Fenner Precision vacuum belt, you can be sure of a high-quality image at a lower cost.
Value Adding Features
- Dual durometer belting to give different inside and outside surface characteristics
- Improved grinding methods
- We can grind on the inside and outside of the belt to increase driving torque or coefficient of friction respectively
- Our grinding processes also means we can control belt thickness by +/- 0.05 mm
- Integrally molded tracking ribs to ensure highly accurate movement and no side to side to tracking
- We have developed all of our processes to ensure tight specification control
Lightweight Belts
Fenner Precision lightweight belts are typically manufactured from rubber, with a fabric reinforcement.
Providing an excellent balance of flexibility, traction and durability, these flat belts enable improved efficiency and reduced manufacturing cost in lighter-weight conveying applications, for example in the food processing industry.
PU Flat Belts
Engineered for outstanding durability, Fenner Precision PU flat belts offer a reliable, low-maintenance and high performance solution for …
Lightweight Belts
Fenner Precision lightweight belts are typically manufactured from rubber, with a fabric reinforcement.
Providing an excellent balance of flexibility, traction and durability, these flat belts enable improved efficiency and reduced manufacturing cost in lighter-weight conveying applications, for example in the food processing industry.
PU Flat Belts
Engineered for outstanding durability, Fenner Precision PU flat belts offer a reliable, low-maintenance and high performance solution for applications with demanding ‘lift’ and ‘pull’ requirements.
Speciality Flat Belts are customized through material choice, secondary operation, dimensions or design.
Typical Material and Physical Properties
- Wide Range of Hardness
- High Load Bearing Capacity
- Flexible
- Resistant to Abrasion
- Resistant to Tears
- Strong Bonding Properties
- Performs in a Diverse Range of Environments
Value Adding Features
- Endless design for longer life (Bale Wrapping Belts)
- Custom punching of holes and other shapes
- Grinding
- Dual Durometer
- Backside features including ribs and tracking guides. (In the case of molded polyurethane belts, these features can be integrally molded into the belt)